產品品牌：茂迪

產品型號：鋼化玻璃層壓

The SPM10-M series modules consists of 36pcs 125 x 125mm mono crystalline silicon solar cell with high efficiency, high transmission rate and low iron tempered glass, anti-aging EVA and high frame resistant TPT to laminate, products have high efficiency, long life, easy installation, high wind and hail impact resistance, and more advantages

Encapsulation: glass/EVA/cells/EVA/TPT

Size and number of cells: 125 x 125mm 36/4 x 9pcs

Maximum power(Pm): 9.5W, 10W, and 11W

Tolerance: ±5%

Voltage at max power(Vmp): 17.2V

Current at max power(Imp): 0.55A, 0.58A, and 0.63A

Open circuit voltage(Voc): 21.6V, 21.6V, and 21.6V

Short circuit current(Isc): 0.60A, 0.63A, and 0.69A

Maximum system open voltage: 715V

Diodes: none

Dimensions: 340 x 285 x 23mm

Weight: 1.3kg

Operate temperature scope: -40/+85℃

Relative humidity: 0 to 100%

Resistances: 227g steel ball fall down from 1m height and 60m/s wind

Warranty: Pm is not less than 90% in 10 years and 80% in 25 years

Test conditions: at STC 1,000W/, AM1.5,  25℃

Product standards: module certified to CE